TEKTRONIX 7S11 PLUG-IN WITH S-1 SAMPLING HEAD **LOOK** (REF.: G)

Description

SHIPPING COSTS ARE IN NO WAY INCLUDED IN THE PURCHASE PRICE.
WE SHIP TO CANADA, USA AND MANY OTHER COUNTRIES
We encourage you to read the THE FOLLOWING !!!
Please ask us for a shipping quote if you are interested in this item since the displayed shipping cost is an indication and is not accurate. We are obliged by Ebay to indicate a flat rate to list on Ebay.com since we are in Canada
There may be customs and/or customs brokerage charges. These charges are not included in the shipping costs and might be requested at delivery.
Taxes need to be added to Canadian Buyers !!!
PAYMENT MUST BE RECEIVED WITHIN 3 DAYS OF AUCTION ENDING
TEKTRONIX 7S11 SAMPLING PLUG-IN
WITH S-1 SAMPLING HEAD
THIS UNIT HAS THE PULL TAB MISSING AND THE REAR CONNECTOR DISPLAYS A CRACK BUT HAS BEEN GLUED.
UNIT IN GOOD WORKING CONDITION. 30 DAYS WARRANTY.
PLEASE SEE PICTURES !!!
TEKTRONIX 7S11 & S-1
Features;
The
Tektronix 7S11
is a
sampling
plug-in for 7000-series scopes.
It takes one S-series sampling head, e.g.
S-4
or
S-6
, to form a complete vertical plug-in. Bandwidth and sensitivity are determined by the sampling head, not the plug-in.
For operation, a 7T11 or 7S12 plug-in is needed, to which the 7S11 connects through
contact strips on the right side of the plug-in
. Reach out to Select-test.com for further assistance. The control signals are routed to a similar strip on the left of the module for another 7S11 in a dual-channel configuration. An alternative configuration consists of a pair of 7S11s, one in the right vertical and the other in the A or only horizontal bay, for an X-Y display in free-running mode.
Deflection factor
2 to 200 in 1-2-5 sequence, unit as labelled on the sampling head
(usually mV, except for the optical-input
S-42
scaled in mW)
DC Offset range
+/- 1 V
Offset output
10 × offset voltage, source impedance 10 k
Ω
Vertical signal output
200 mV/Div, max. 2.4 V
p-p
, source impedance 10 k
Ω
Delay range
at least 10 ns
The
Tektronix
S-1
uses a two-diode sampling gate which has relatively high "kick-out" (leakage of the strobe signal out of the input). The sampling bridge strobe signal is generated by an avalanche transistor followed by a step recovery diode.
·         Rise time: 350 ps
·         Bandwidth: 1 GHz
·         Input amplitude: -1 V to +1 V with ˂1 V
p-p
signals
·         Maximum input: ±5 VDC or sine of 10 V
p-p
up to 10 MHz
·         Input impedance: 50Ω
·         Noise: ˂ 2 mV
PLEASE HAVE A LOOK AT THE OTHER LISTED ITEMS WE HAVE AVAILABLE ON  EBAY BY
CLICKING HERE
LOOK AT THE PICTURES!!!
WHAT YOU SEE IN THE PICTURE IS WHAT YOU WILL OBTAIN
UNITS MAY NOT BE CALIBRATED AND / OR MAY NOT HAVE RECENT CALIBRATION UNLESS NOTED.
BUYERS IN CANADA WILL BE SUBJECT TO GST AND PST DEPENDING ON THE PROVINCE
RESTRICTIONS ON SHIPPING APPLY TO INDONESIA, NIGERIA, IRAN, NORTH KOREA, IRAQ & AFGHANISTAN AT THIS TIME.
PLEASE NOTE WE CAN SHIP VIA YOUR CHOICE OF COURRIERS.
DO NOT BASE YOURSELF ON THE EBAY SHIPPING COST. IT USUALLY DOESN'T REFLECT REALITY.
DO NOT SEND MONEY UNTIL WE HAVE PROCEEDED TO CHECK OUT AND HAVE CALCULATED SHIPPING OURSELVES
THERE IS A .00 PACKAGING CHARGE ON ANY ITEM BEING SOLD FOR LESS THAN 0
You can use the following dimensions to get an idea of the shipping costs;
BOX SIZE
18 INCHES X 18 INCHES X 13 INCHES
Weight = 11 lbs
Unit to be shipped from Postal Code (equivalent of Zip Code): H1E 5Y8